Enabling Intel VT

Enabling Intel VT on ML350 ,DL380 G5

You have to Enabling Intel VT from Bios, before you install Hyper-v Role on HP Poliant Servers (HP G5 DL380, ML350…)

Poliant ML350 G5 – DL380 G5  servers:

  1. Reboot the server
  2. get into the bios by pressing F9 after you see diks, and bmc select
  3. select in the bios ADVANCE tab
  4.   HP_01
  5. Processor Options
  6.   HP_02
  7. Enable “Intel(R) Virtualization Technology
  8. HP_03
  9. Enable “No-Excecute Memory Protection”
  10. save and exit (F10)
  11. Reboot the server

Note: Check Bios setting if you get “Hypervisor is not running” error while installing Hyper-V role or starting VM’s. This means that Virtualization Technology not enabled or processor does not support virtualization.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s